《材料力学》课程PPT教学课件(双语版)第十五章 实验应力分析基础

Mechanics of materials CHAPTER 15 FOUNDATTONS OF THE STRESS ANALYSIS IN EXPERIMENTS
Mechanics of Materials

T

CHAPTERIS FOUNDATIONS OF THE STRESS ANALYSIS N EXPERMENTS □§15-1 SUMMARY DI815-2 PRINCIPLE AND APPLICATION OF THE STRAINOMETER OF THE RESISTANCE D815-3 PRINCIPLE AND APPLICATION OF THE PHOTOELASTICITY
CHAPTER15 FOUNDATIONS OF THE STRESS ANALYSIS IN EXPERIMENTS §15–1 SUMMARY §15–2 PRINCIPLE AND APPLICATION OF THE STRAINOMETER OF THE RESISTANCE §15–3 PRINCIPLE AND APPLICATION OF THE PHOTOELASTICITY

第十五章实验应力分析基础 §15-1概述 □§152电阻应变计法的原理及应用 §153光弹性法的原理及应用
第十五章 实验应力分析基础 §15–1 概 述 §15–2 电阻应变计法的原理及应用 §15–3 光弹性法的原理及应用

§15-1 Summary Function of the stress analysis method in experiments 1. Determine the reasonable dimension and the structureal form of a memberaccording to the tested stress or strain of the model in designing 2. Test the true stress or strain of a member in work and find out the position and the value of the maximum stress in order to evaluate the safty and reliability of the engineering structure and to provide the basis of improving working ability for the equipment, 3. Analyze the destroyed or failed member and propose the measures of improvement in order to prevent it from destroy ing again 4. Test the magnitude, derection and all kinds of dynamic responses of the external load 5. Explore the new rule from tests and check the theory of stress analysis and the calculation method
§15–1 Summary 一、Function of the stress analysis method in experiments : 1. Determine the reasonable dimension and the structureal form of a memberaccording to the tested stress or strain of the model in designing. 2. Test the true stress or strain of a member in work and find out the position and the value of the maximum stress in order to evaluate the safty and reliability of the engineering structure and to provide the basis of improving working ability for the equipment. 3. Analyze the destroyed or failed member and propose the measures of improvement in order to prevent it from destroying again. 4. Test the magnitude,derection and all kinds of dynamic responses of the external load. 5. Explore the new rule from tests and check the theory of stress analysis and the calculation method

实验血力分基 §15-1概述 一、实验应力分析方法的作用 1.设计时,测定模型的应力或变形,依此来确定构件的合理尺 寸和结构形式 2.工作中,测定构件的真实应力或变形,找出最大应力的位置 和数值,以评价工程结构的安全可靠性,并为提高设备的 工作能力提供依据。 3.对破坏或失效构件进行分析,提出改进措施,防止再次破坏。 4测定外载的大小、方向以及各种动响应。 5.从试验中探索新的规律,并对应力分析理论和计算方法进行 校核
§15–1 概 述 一、实验应力分析方法的作用: 1.设计时,测定模型的应力或变形,依此来确定构件的合理尺 寸和结构形式。 2.工作中,测定构件的真实应力或变形,找出最大应力的位置 和数值,以评价工程结构的安全可靠性,并为提高设备的 工作能力提供依据。 3.对破坏或失效构件进行分析,提出改进措施,防止再次破坏。 4.测定外载的大小、方向以及各种动响应。 5.从试验中探索新的规律,并对应力分析理论和计算方法进行 校核

Briefintroduction of methods in the stress analysis of experiments 复乎武 1. The machinery measuring method The figure of measuring deformations in the book annotated by Zheng Xuan(127-200)in the east Han dynasty
二、Brief introduction of methods in the stress analysis of experiments 1.The machinery measuring method. The figure of measuring deformations in the book annotated by Zheng Xuan(127-200)in the east Han dynasty

实验血力分基 二、实验应力分析方法简介 到 机械量测法 东汉郑玄(127-200注释的《考工记弓人》中的测变形图
二、实验应力分析方法简介: 1. 机 械 量 测 法 东汉郑玄(127—200)注释的《考工记•弓人》中的测变形图

FOUNDATIOS OP THE STINS ASIS T BPERTIETS D Leonardo Da vinci( 1452 1519). This picture is considered to show the earliest test in mechanics of materials The tensile test of an iron wire designed by Leonardo da vinci
Leonardo Da Vinci( 1452- 1519).This picture is considered to show the earliest test in Mechanics of Materials. The tensile test of an iron wire designed by Leonardo Da Vinci

里奥纳多达·芬奇(1452-1519) 此图被认为是最早的材力试验 里奥纳多达芬奇设计的铁丝受 拉试验
里奥纳多•达•芬奇(1452—1519) 此图被认为是最早的材力试验 里奥纳多•达•芬奇设计的铁丝受 拉试验
按次数下载不扣除下载券;
注册用户24小时内重复下载只扣除一次;
顺序:VIP每日次数-->可用次数-->下载券;
- 《材料力学》课程PPT教学课件(双语版)第十四章 交变应力.ppt
- 《材料力学》课程PPT教学课件(双语版)第十三章 动荷载.ppt
- 《纺织材料学》课程电子教案(讲义,共八章).doc
- 《材料力学》第三章 扭转 Torsion 3.1 概念与实例 3.3 外力偶矩的计算 3.4 等直圆杆的扭转 3.5 非圆截面杆纯扭转的概念 3.6 等直非圆杆.ppt
- 《材料力学》第二章 轴向拉伸和压缩(2.8)拉、压超静定问题.ppt
- 《材料力学》第二章 轴向拉伸和压缩(2.7)强度条件安全系数许用应力.ppt
- 《材料力学》第二章 轴向拉伸和压缩(2.6)材料在拉伸和压缩时的力学性能.ppt
- 《材料力学》第二章 轴向拉伸和压缩 2.4 拉(压)杆的变形(Deformation of Axial Forced Bar)·胡克定律(Hooke’s Law)2.5 拉(压)杆内的应变能 Strain Energy of Axial Forced Bar.ppt
- 《材料力学》第二章 轴向拉伸和压缩 2.1 轴向拉伸和压缩的概念 2.2 内力·截面法·轴力及轴力图 2.3 横截面及斜截面上的应力.ppt
- 《材料力学》第一章 绪论及基本概念.ppt
- 《材料力学》第十二章 压杆稳定 Stability of Compressive Bars.ppt
- 《材料力学》第十章 强度理论 Theory of Strength.ppt
- 《材料力学》第九章 应力与应变分析 Analysis of Stress & Strain.ppt
- 《材料力学》第八章 剪切与连接件的实用计算 Shearing.ppt
- 《材料力学》第六章 弯曲变形 Deformations in Bending 6.3 按叠加原理计算梁的挠度和转角 6.4 梁的刚度 6.5 梁内的弯曲应变能 6.6 简单超静定梁的解法 6.7 超静定梁.ppt
- 《材料力学》第六章 弯曲变形 Deformations in Bending 6.1 概述 6.2 梁的挠曲线近似微分方程 6.3 按叠加原理计算梁的挠度和转角.ppt
- 《材料力学》第五章 弯曲应力 Stresses in Bending 5.4 横截面上的剪应力 5.5 梁的合理设计.ppt
- 《材料力学》第五章 弯曲应力 Stresses in Bending 5.1 引言 5.2 纯弯曲时梁横截面上的正应力 5.3 梁的正应力强度条件.ppt
- 《材料力学》第四章 复习.ppt
- 《材料力学》第四章 弯曲内力 Internal Forces in Bending.ppt
- 《材料力学》课程PPT教学课件(双语版)第十六章 材料力学性能的进一步研究.ppt
- 《材料力学》课程PPT教学课件(双语版)第十一章 能量方法.ppt
- 《材料力学》课程PPT教学课件(双语版)第十二章 静不定结构.ppt
- 黑龙江工程学院:《土木工程材料》课程电子教案(PPT课件讲稿)第一章 绪言(孙凌).ppt
- 黑龙江工程学院:《土木工程材料》课程电子教案(PPT课件讲稿)第二章 气硬性胶凝材料.ppt
- 黑龙江工程学院:《土木工程材料》课程电子教案(PPT课件讲稿)第三章 水泥.ppt
- 黑龙江工程学院:《土木工程材料》课程电子教案(PPT课件讲稿)第四章 水泥混凝土.ppt
- 黑龙江工程学院:《土木工程材料》课程电子教案(PPT课件讲稿)第五章 沥青材料.ppt
- 黑龙江工程学院:《土木工程材料》课程电子教案(PPT课件讲稿)第六章 沥青混合料.ppt
- 河南科技大学:《金属材料成形基础》课程教学资源_作业.ppt
- 河南科技大学:《金属材料成形基础》课程教学资源(作业试卷)试卷一试题.doc
- 河南科技大学:《金属材料成形基础》课程教学资源(作业试卷)试卷一参考答案.doc
- 河南科技大学:《金属材料成形基础》课程教学资源(作业试卷)试卷二试题.doc
- 河南科技大学:《金属材料成形基础》课程教学资源(作业试卷)试卷二参考答案.doc
- 河南科技大学:《金属材料成形基础》课程教学资源(作业试卷)试卷三试题.doc
- 河南科技大学:《金属材料成形基础》课程教学资源(作业试卷)试卷三参考答案.doc
- 中南大学材料科学与工程学院:《金属塑性加工原理》课程教学课件 Principle of Plastic Deformation in Metal Processing(PPT完整讲稿,共四篇九章,主讲:张新明).ppt
- 《材料力学》第九章 应力状态与强度理论.ppt
- 《材料力学》第十二章 超静定结构.ppt
- 《材料力学》第三章 剪切.ppt