清华大学:《机械原理》课程PPT教学课件(双语版)Chap 8 Combined Mechanisms

Chap. 8 Combined Mechanisms Chap 8.1 Classification Chap 8.2 Application Investigate and review by students
Chap.8 Combined Mechanisms Chap.8.1 Classification Chap.8.2 Application Investigate and Review by Students

Chap 8.1 Classification r Named by the sub-mechanisms r Named by the patterns of transmission route
Chap.8.1 Classification Named by the sub-mechanisms Named by the patterns of transmission route

Series combined mechanisms B Input output Mechanism I MechanismⅡ (link1,25) (link2,3,5) Output motions of one basic mechanism is the input motion of the next basic mechanism
Series Combined Mechanisms Mechanism Ⅰ (link 1,2,5) Mechanism Ⅱ (link 2,3,5) input output Output motions of one basic mechanism is the input motion of the next basic mechanism. 5

Parallel combined mechanisms The n Output motions of the B n single dof basic mechanism are input simultaneously to a basic mechanism with n Dof and 6 then combined to produce an F output Mechanism I input (link2,3,4,10 Mechanism III output MechanismⅡ (link4,59,8,10) (ink6,7,8,10
Parallel Combined Mechanisms input output Mechanism Ⅰ (link 2,3,4,10) Mechanism Ⅱ (link 6,7,8,10) Mechanism Ⅲ (link 4,5,9,8,10) The n Output motions of the n single DOF basic mechanism are input simultaneously to a basic mechanism with n DOF and then combined to produce an output. 10 9

Feedback Combined mechanisms a differential mechanisms has two doF In some differential 3 mechanism, one of the inputs 4 comes from the driver output directly. The other input is put Mechanism I the feedback from the output (ink 1, 2, 4) of the differential mechanism through the single doF MechanisnⅡl mechanism (link2,3,4)
Feedback Combined Mechanisms input output Mechanism Ⅰ (link 1,2,4) MechanismⅡ (link 2’,3,4) A differential mechanisms has two DOF. In some differential mechanism, one of the inputs comes from the driver directly. The other input is the feedback from the output of the differential mechanism through the single DOF mechanism. 4

Mixed combined mechanisms r A mechanism system formed through more than one combination pattern is called mixed combined mechanism 自由度大于1的差动机构称为组合机构的基础机构 自由度为1的基本机构称为组合机构的附加机构 所谓封闭式传动机构,是指用一个机构去约束或影 响另一个多自由度机构所形成的封闭式传动系统
Mixed Combined Mechanisms A mechanism system formed through more than one combination pattern is called mixed combined mechanism. 自由度大于1的差动机构称为组合机构的基础机构; 自由度为1的基本机构称为组合机构的附加机构。 所谓封闭式传动机构,是指用一个机构去约束或影 响另一个多自由度机构所形成的封闭式传动系统

Chap 8.2 Application 1. Complex path 2. Complex motion form B C 3 5
Chap.8.2 Application 1. Complex path 2. Complex motion form

Homework analyze the combining form 易对)
Homework Analyze the combining form
按次数下载不扣除下载券;
注册用户24小时内重复下载只扣除一次;
顺序:VIP每日次数-->可用次数-->下载券;
- 清华大学:《机械原理》课程PPT教学课件(双语版)Chap 7 other mechanisms.ppt
- 清华大学:《机械原理》课程PPT教学课件(双语版)Chap 6 intermittent mechanisms.ppt
- 清华大学:《机械原理》课程PPT教学课件(双语版)Chap 5 Gear Trains.ppt
- 清华大学:《机械原理》课程PPT教学课件(双语版)Chap 4 Cam Mechanism.ppt
- 清华大学:《机械原理》课程PPT教学课件(双语版)Chap 3 planar linkage.ppt
- 清华大学:《机械原理》课程PPT教学课件(双语版)Chap 2 Kinematics fundamental.ppt
- 清华大学:《机械原理》课程PPT教学课件(双语版)Chap10 Scheme of Mechanism system.ppt
- 清华大学:《机械原理》课程PPT教学课件(双语版)Chap1 The content of our course.ppt
- 清华大学:《机械原理》课程PPT教学课件(双语版)第9章 开式链机构.ppt
- 清华大学:《机械原理》课程PPT教学课件(双语版)第8章 组合机构.ppt
- 清华大学:《机械原理》课程PPT教学课件(双语版)第7章 其它机构(简介).ppt
- 清华大学:《机械原理》课程PPT教学课件(双语版)第6章 间歇运动机构.ppt
- 清华大学:《机械原理》课程PPT教学课件(双语版)第5章 轮系机构.ppt
- 清华大学:《机械原理》课程PPT教学课件(双语版)第4章 齿轮传动机构.ppt
- 清华大学:《机械原理》课程PPT教学课件(双语版)第3章 凸轮机构.ppt
- 清华大学:《机械原理》课程PPT教学课件(双语版)第2章 连杆机构.ppt
- 清华大学:《机械原理》课程PPT教学课件(双语版)第15章 机械传动系统的方案设计和原动机选择.ppt
- 清华大学:《机械原理》课程PPT教学课件(双语版)第14章 机械执行系统方案设计.ppt
- 清华大学:《机械原理》课程PPT教学课件(双语版)第13章 机械总体方案的设计.ppt
- 清华大学:《机械原理》课程PPT教学课件(双语版)第12章 机械的效率.ppt
- 清华大学:《机械原理》课程PPT教学课件(双语版)Chap 9 Open Chain, Mechanisms.ppt
- 南京理工大学:《工程制图学》课程教学资源(讲义)前言.doc
- 南京理工大学:《工程制图学》课程教学资源(讲义)目录.doc
- 南京理工大学:《工程制图学》课程教学资源(讲义)第一章 制图的基本知识.doc
- 南京理工大学:《工程制图学》课程教学资源(讲义)第七章 机件的常用表达方法.doc
- 南京理工大学:《工程制图学》课程教学资源(讲义)第三章 立体的投影.doc
- 南京理工大学:《工程制图学》课程教学资源(讲义)第九章 装配图.doc
- 南京理工大学:《工程制图学》课程教学资源(讲义)第二章 投影基础.doc
- 南京理工大学:《工程制图学》课程教学资源(讲义)第五章 组合体的视图及尺寸注法.doc
- 南京理工大学:《工程制图学》课程教学资源(讲义)第八章 零件图.doc
- 南京理工大学:《工程制图学》课程教学资源(讲义)第六章 轴测投影图.doc
- 南京理工大学:《工程制图学》课程教学资源(讲义)第十一章 工程制图协同学习系统.doc
- 南京理工大学:《工程制图学》课程教学资源(讲义)第十章 计算机绘图基础.doc
- 南京理工大学:《工程制图学》课程教学资源(讲义)第四章 平面与立体和立体与立体相交.doc
- 南京理工大学:《工程制图学》课程教学资源(讲义)绪论.doc
- 邯郸职业技术学院:《数控编程与加工技术》课程教学资源(PPT课件)第3章 数控铣削编程与加工技术(2/3).ppt
- 湖南工业大学(株洲工学院):《包装容器结构设计与制造》课程PPT教学课件(讲稿)第一篇 包装容器设计基础.ppt
- 湖南工业大学(株洲工学院):《包装容器结构设计与制造》课程PPT教学课件(讲稿)第二篇 金属容器结构设计与制造.ppt
- 湖南工业大学(株洲工学院):《包装容器结构设计与制造》课程PPT教学课件(讲稿)第三篇 纸包装容器结构设计与制造.ppt
- 湖南工业大学(株洲工学院):《包装容器结构设计与制造》课程PPT教学课件(讲稿)第四篇 塑料包装容器结构设计与制造.ppt