上海交通大学：《结构概念设计 Conceptual design》教学资源（课程讲义）Chapter 5 Structure Loads and Responses

Chapter 5 Structure Loads and Responses 5.1.Dead Loads 5.2.Live Loads,Snow and Wind Loads 5.3.Earthquake Loads 5.4.Internal and External Movement 5.5.Response of structures and codes

Chapter 5 Structure Loads and Responses 5.1. Dead Loads 5.2. Live Loads, Snow and Wind Loads 5.3. Earthquake Loads 5.4. Internal and External Movement 5.5. Response of structures and codes

5.5.Response of structures and codes The response of the structure to the loadings Under the dead load the building will be stressed and deflected little. When live load is added,deflection and higher stresses are produced not seriously. -The horizontal effect of wind or earthquake can be quite serious in contrast to the dead and live load situations. -The reserve load capacity supplies the additional 'margin of safety'to take care of catastrophic forces,also keep the behavior of the structure within tolerable limits of movement

5.5. Response of structures and codes The response of the structure to the loadings - Under the dead load the building will be stressed and deflected little. - When live load is added,deflection and higher stresses are produced not seriously. -The horizontal effect of wind or earthquake can be quite serious in contrast to the dead and live load situations. -The reserve load capacity supplies the additional „margin of safety‟ to take care of catastrophic forces, also keep the behavior of the structure within tolerable limits of movement

Fig.5-6 Life history of a structure ELASTIC BEHAVIOR PLASTIC BEHAVIOR ULTIMATE LOAD RESERVE LOAD CAPACITY av01 WIND OR E.Q.LOAD 告 LIVE LOAD DEAD LOAD DEFLECTION ONLY PARTIAL OR ZER LIVE LOAD CONSIDERED TOGETHER WITH WIND OR E

Fig.5-6 Life history of a structure

Fig.5-6 Life history of a prestressed structure + PRESTRESSED LOAD CURVE NON-PRESTRESSED CURVE WIND OR E.Q.lOAD￥ LIVE LOAD DEAD LOAD (LITTLE OR NO DEFLECTION) DEFLECTION 米ONLY PARTIAL OR ZERO LIVE LOAD CONSIDERED TOGETHER WITH WIND OR三：-

Fig.5-6 Life history of a prestressed structure

Codes Modern building codes have changes the "allowable stress"approach to a more reasonable "ultimate strength"design method. A building designer should use building codes only as a reference and as a guide,but not bible.Some code requirements are excessively conservative,others are not sufficient (especially for unusual designs)

Codes Modern building codes have changes the “allowable stress” approach to a more reasonable “ultimate strength” design method. A building designer should use building codes only as a reference and as a guide, but not bible. Some code requirements are excessively conservative, others are not sufficient (especially for unusual designs)

How safe is safe enough? 我国的结构设计安全储备 是否应该大幅度提高？ 国 安全 产 ]储备 国内生产总值变化曲线 安全储备变化曲线 50 60 70 80 90 year

How safe is safe enough? 我国的结构设计安全储备 是否应该大幅度提高？ 50 60 70 80 90 year 国 内 生 产 总 值 安 全 储 备 安 全 储 备 变 化 曲 线 国 内 生 产 总 值 变 化 曲 线

Chapter 6 Overall Design of Horizontal Subsystem 6.1.Overall Structural Behavior of HS 6.2.Flat-Slab Subsystem 6.3.Slab-Beam Subsystem 6.4.Joist-Girder Subsystem 6.5.Waffle Subsystem 6.6.Space Truss Subsystem

Chapter 6 Overall Design of Horizontal Subsystem 6.1. Overall Structural Behavior of HS 6.2. Flat-Slab Subsystem 6.3. Slab-Beam Subsystem 6.4. Joist-Girder Subsystem 6.5. Waffle Subsystem 6.6. Space Truss Subsystem

The relationship of HS and VS: Closer column (expensive VS) =reducing the thickness of the slab/beam (economic HS) But it loses space openness and flexibility of use

The relationship of HS and VS: Closer column (expensive VS) =reducing the thickness of the slab/beam (economic HS) But it loses space openness and flexibility of use

6.1.Overall Structural Behavior of Horizontal Subsystems Horizontal subsystems, which are formed by slab,beam grid and truss,act vertically to carry floor and roof loads in bending.It also pick up loads from the vertical subsystems and resist horizontal forces

6.1. Overall Structural Behavior of Horizontal Subsystems Horizontal subsystems, which are formed by slab, beam grid and truss, act vertically to carry floor and roof loads in bending. It also pick up loads from the vertical subsystems and resist horizontal forces

Key of the horizontal subsystem design -Overall bending behavior (bending design) -Shearing forces near the supports (punching shear check)

Key of the horizontal subsystem design -Overall bending behavior (bending design) -Shearing forces near the supports (punching shear check)