《塑料成型工艺与模具》参考资料：标准_Quick-Change MUD Systems

MUD Quick-Change m systems MUD A R N IE Increased productivity decreased tooling costs

MUD Quick-Change™ Systems Increased productivity, decreased tooling costs

Benefits of the Master Unit Die concept Reduces overall tooling investment e Facilitates lean manufacturing Cuts setup time and labor costs Maximizes production uptime Simplifies mold installation Improves mold design efficiencies Enables incremental cavity expansion Enhanced series insert Easier maintenance, handling and storage Solid style insert MUD frames and inserts The MUD Quick-Change" System is available in three frame styles(the MUd U frame, the MUD H frame, and the MUD Double H frame) and in sizes suitable for the smallest air-operated molding machines up to 500-ton machines. Insert molds are available in standard or T-style design. All Quick-Change frames are precision made to exacting tolerances and are easily matched to the specifications of individual machines. Each frame is engineered for extra strength and rigidity and is designed for maximum molding versatility U Series Qluick-Change frames Ideally suited for injection molding the MUD U frame offers tremendous design flexibility. It is the most popular type of MUD frame. The U frame accepts both standard and T-style companion insert molds. Designed to accept a single interchangeable insert mold, the versatile MUd U frame can be easily adapted to double insert production with the addition of an optional removable center bar and two smaller inserts The master Unit Die Instant Connect M waterline system is an exceptional option Double H Series Quick-Change frames Double h frames offer all of the benefits of h frames with twice the production because they enable simultaneous molding of four insert molds. Blank inserts or runner shut-offs may be used to permit running of fewer than four insert molds Like the MUD H frame model, the benefits of both Quick-Change tooling and hot runner molding can be combined with the addition of a manifold system

Double H Series Quick-Change™ frames Double H frames offer all of the benefits of H frames with twice the production because they enable simultaneous molding of four insert molds. Blank inserts or runner shut-offs may be used to permit running of fewer than four insert molds. Like the MUD H frame model, the benefits of both Quick-Change tooling and hot runner molding can be combined with the addition of a manifold system. Benefits of the Master Unit Die concept • Reduces overall tooling investment • Facilitates lean manufacturing • Cuts setup time and labor costs • Maximizes production uptime • Simplifies mold installation • Improves mold design efficiencies • Enables incremental cavity expansion • Easier maintenance, handling and storage MUD frames and inserts The MUD Quick-Change™ System is available in three frame styles (the MUD U frame, the MUD H frame, and the MUD Double H frame) and in sizes suitable for the smallest air-operated molding machines up to 500-ton machines. Insert molds are available in standard or T-style design. All Quick-Change frames are precision made to exacting tolerances and are easily matched to the specifications of individual machines. Each frame is engineered for extra strength and rigidity, and is designed for maximum molding versatility. U Series Quick-Change™ frames Ideally suited for injection molding, the MUD U frame offers tremendous design flexibility. It is the most popular type of MUD frame. The U frame accepts both standard and T-style companion insert molds. Designed to accept a single interchangeable insert mold, the versatile MUD U frame can be easily adapted to double insert production with the addition of an optional removable center bar and two smaller inserts. The Master Unit Die Instant Connect™ waterline system is an exceptional option. Solid style insert Enhanced series insert

Companion insert molds Companion interchangeable insert molds for Master Unit Die Quick-Change frames offer mold designers, moldmakers and molders almost unlimited application flexibility. Available in a wide range of sizes and in your choice of steel type, all MUD inserts are interchangeable with matching frames. The two basic styles are T-Style Companion Inserts and Standard Style Companion Inserts Standard style companion inserts T-Style companion inserts Standard Style Companion Inserts are an Highly popular because its interchangeable style offers interchangeable style that offers maximum economy. maximum projected mold area, T-Style Companion Inserts Available in both solid and laminated construction are available in laminated construction including three- including three-and four-plate configuration and four-plate configurations. T-style insert options and Standard Style Companion Inserts include the same features can include a choice of injection methods, as basic options and features offered with the T-style. well as machining for stripper plates and other special The MUD Quick-Change system for standard mold bases The Mud Quick-Change Adapter Frame System can accomplish H Series standard mold base production changeovers in less than 10 minutes Quick-Change" frames The system is based on a MUD frame that remains in the molding MUD H frame models offer machine during changeovers. Standard mold bases equipped with companion ear plates are interchanged within simultaneous molding of two this adapter frame and easily slide in and out standard style companion insert molds. One insert mold can be rur of the adapter frame by installing the blank insert to Just one adapter frame accommodates an block off one section of the frame un limited number and size of standard mold The mold ejector system can be bases While these frames can remain in the tied to the frame master ejector machine indefinitely, they are easily plate with optional interlocking rails transferred to other machine H Series frames are well suited to both MUD Quick-Change adapter frames and injection and transfer molding mpanion ear plates are available in six pplications. a hot runner manifold can standard sizes. Each size accommodates a be added to combine the benefits of ide range of standard mold bases Quick-Change systems with hot runner Selecting the largest adapter frame that fits a molding molding machine allows interchanging standard mold bases up to the machine's maximum capacity. The addition of the mUd instant Connect waterline system permits extraordinarily fast changeover of standard mold bases

H Series Quick-Change™ frames MUD H frame models offer simultaneous molding of two standard style companion insert molds. One insert mold can be run by installing the blank insert to block off one section of the frame. The mold ejector system can be tied to the frame master ejector plate with optional interlocking rails. H Series frames are well suited to both injection and transfer molding applications. A hot runner manifold can be added to combine the benefits of Quick-Change systems with hot runner molding. Companion insert molds Companion interchangeable insert molds for Master Unit Die Quick-Change frames offer mold designers, moldmakers and molders almost unlimited application flexibility. Available in a wide range of sizes and in your choice of steel type, all MUD inserts are interchangeable with matching frames. The two basic styles are T-Style Companion Inserts and Standard Style Companion Inserts. T-Style companion inserts Highly popular because its interchangeable style offers maximum projected mold area, T-Style Companion Inserts are available in laminated construction including three￾and four-plate configurations. T-style insert options and features can include a choice of injection methods, as well as machining for stripper plates and other special applications. Standard style companion inserts Standard Style Companion Inserts are an interchangeable style that offers maximum economy. Available in both solid and laminated construction, including three- and four-plate configurations, Standard Style Companion Inserts include the same basic options and features offered with the T-style. The MUD Quick-Change™ system for standard mold bases The MUD Quick-Change Adapter Frame System can accomplish standard mold base production changeovers in less than 10 minutes. The system is based on a MUD frame that remains in the molding machine during changeovers. Standard mold bases equipped with companion ear plates are interchanged within this adapter frame and easily slide in and out of the adapter frame. Just one adapter frame accommodates an unlimited number and size of standard mold bases. While these frames can remain in the machine indefinitely, they are easily transferred to other machines. MUD Quick-Change adapter frames and companion ear plates are available in six standard sizes. Each size accommodates a wide range of standard mold bases. Selecting the largest adapter frame that fits a molding machine allows interchanging standard mold bases up to the machine’s maximum capacity. The addition of the MUD Instant Connect waterline system permits extraordinarily fast changeover of standard mold bases

Master unit Die World's Leading Guick-Change Syst The master Unit Die Quick-Change" Sys concept was created in 1958 to achieve the objectives of increased productivity and decreased cost. Through advancement in molding technology, the innovative mud quick- Change System not only increases productivity by improving uptime, but may also reduce tooling costs D-M-E of canada, Ltd. D-ME D-M-E Company D-M-E Europ 6210 Northwest Drive D-M-E Belgium C. V.B.A. Stephenson Highway ississauga, Ontario, L4V 1J6 Industriepark Noord ts,M4807 A Milacron Company 800-626-6653 toll 800387-6600to∥free B-2800 Mechelen, Belgium 905677-6370tel 32-15-215011tel 248-398-6000 800-461-9965 toll-free fax 32-15-218235fax 888-808-4363 toll-free fax info@dme.nete-mail dme_europe @dmeeu com e-mail info@dme.nete-mail ww.dme net web

D-M-E Company World Headquarters 29111 Stephenson Highway Madison Heights, MI 48071 800-626-6653 toll free 248-398-6000 tel 888-808-4363 toll-free fax info@dme.net e-mail www.dme.net web D-M-E of Canada, Ltd. 6210 Northwest Drive Mississauga, Ontario, L4V 1J6 800-387-6600 toll free 905-677-6370 tel 800-461-9965 toll-free fax info@dme.net e-mail D-M-E Europe D-M-E Belgium C.V.B.A. Industriepark Noord B-2800 Mechelen, Belgium 32-15-215011 tel 32-15-218235 fax dme_europe@dmeeu.com e-mail Master Unit Die -- World’s Leading Quick-Change™ Systems The Master Unit Die Quick-Change™ System concept was created in 1958 to achieve the objectives of increased productivity and decreased cost. Through advancement in molding technology, the innovative MUD Quick￾Change System not only increases productivity by improving uptime, but may also reduce tooling costs