深圳大学：《塑料成型工艺与模具》课程教学资源（成型方案）032B25610-Guide-ESS

Injection mold specification Client Fuji-Xerox Model name XXX Part name Guide-ESS Part no 032B25610001 DFM Ming Lei

-1- Client Fuji-Xerox Model Name XXX Part Name Guide-ESS Part No. 032B25610_001 DFM Ming.Lei Injection mold specification

ICAL CAL 1-Date of opening(all dates in2005 2-Date of beginning of action DFME Follow-up issue 3-Date foreseen for validation Integral Corrective Action List 4-Date of validation(closing) Page OPEN POINTS SOLUTIONSIAC TION WHO 3 3 Plastic Flow Analysis Confirm Gate 4Parting line Confirm Pl 5 Parting line Confirm PL sHarp steel CanceR 7 Thin steel Reduce plastic 8No draft

-2- ICAL Page OPEN POINTS SOLUTIONS/ACTION WHO 1 2 3 4 3 Plastic Flow Analysis Confirm Gate 4 Parting line Confirm PL. 5 Parting line Confirm PL. 6 Sharp steel Cancel R. 7 Thin steel Reduce plastic. 8 No draft DFME Follow-up issue I C A L Integral Corrective Action List 1-Date of opening (all dates in2005) 2-Date of beginning of action 3-Date foreseen for validation 4-Date of validation (closing)

Plastic Flow Analysis 0.8440 Side gate 0.4220 0.0000 45 Moldflow 87 Scale [100 mm)

-3- Plastic Flow Analysis Side gate

Parting_line CAV CORE 9

-4- Parting _ line CAVITY CORE

Parting_line See slide 7 See slide 7 Cancel r?

-5- Parting _ line See slide 7 See slide 7 Cancel R?

Parting_line Insert Cancel r Sharp steel

-6- Parting _ line Cancel R Insert Sharp steel

Parting_line 3>>2.8 Thin steel(2X) Suggest to reduce plastic from 2.3 to 2.8mm

-7- Parting _ line Thin steel(2X).Suggest to reduce plastic from 2.3 to 2.8mm. 2.3>>2.8

Parting_line All of the surfaces have no draft. We will reduce plastics for mould release. OK?

-8- Parting _ line All of the surfaces have no draft, We will reduce plastics for mould release.OK?