深圳大学：《塑料成型工艺与模具》课程教学资源（成型方案）120B027010-Actuator Latch End

Injection mold specification Client Fuji-Xerox Model name XXX Part name Actuator latch e Part no 120B027010 DFM Ming Lei

-1- Client Fuji-Xerox Model Name XXX Part Name Actuator Latch End Part No. 120B027010 DFM Ming.Lei Injection mold specification

ICAL CAL 1-Date of opening(all dates in2005 2-Date of beginning of action DFME Follow-up issue 3-Date foreseen for validation Integral Corrective Action List 4-Date of validation(closing) Page OPEN POINTS SOLUTIONSIAC TION WHO 3 3 Plastic Flow Analysis Confirm Gate 4Slide Confirm slide 5 Parting line Confirm PL 6Parting line Confirm Pl 7 Undercut CanceR

-2- ICAL Page OPEN POINTS SOLUTIONS/ACTION WHO 1 2 3 4 3 Plastic Flow Analysis Confirm Gate 4 Slide Confirm slide. 5 Parting line Confirm PL. 6 Parting line Confirm PL. 7 Undercut Cancel R. DFME Follow-up issue I C A L Integral Corrective Action List 1-Date of opening (all dates in2005) 2-Date of beginning of action 3-Date foreseen for validation 4-Date of validation (closing)

Plastic Flow Analysis Fill time =1.496s 1.496 1.122 0.7481 0. 3741 0.0000 Side gate -38 Scale (20 mm)

-3- Plastic Flow Analysis Side gate

Parting_line Slide-B Slide-A

-4- Parting _ line Slide-B Slide-A

Parting_line CAVITY CORE

-5- Parting _ line CAVITY CORE

Parting_line CAVITY CORE

-6- Parting _ line CAVITY CORE

Question Slide travel too long. suggest to reduce this hook length from 9mm to 6mm (2X) 6mm 9mm R undercut Suggest to cancel R、(2Ⅹ)

-7- Question R undercut. Suggest to cancel R.(2X) 9mm. 6mm. Slide travel too long.suggest to reduce this hook length from 9mm to 6mm.(2X)

Parting_line All of the surfaces have no draft. we will reduce plastics for mould release. OK?

-8- Parting _ line All of the surfaces have no draft, We will reduce plastics for mould release.OK?