上海交通大学：《材料综合实验》课程教学课件（PPT讲稿）组织分析实验

Module Objective 组织观察实验 分析 Lesson Objectives September 30,1998 Introduction to ANSYS Part 2-Release 5.5 (001129) M3-1

September 30, 1998 M3-1 Introduction to ANSYS Part 2 - Release 5.5 (001129) Module Objective Lesson Objectives 组织观察实验 分析

Module Objective 45#钢 1000℃水淬 组织：铁素体+屈氏体+马氏体 Lesson Objectives September 30,1998 Introduction to ANSYS Part 2-Release 5.5 (001129) M3-2

September 30, 1998 M3-2 Introduction to ANSYS Part 2 - Release 5.5 (001129) Module Objective Lesson Objectives 45#钢 1000℃水淬 组织：铁素体+屈氏体+马氏体

Module Objective 45#钢 1200℃→900℃→淬火 组织：上贝氏体+屈氏体+马氏体 Lesson Objectives September 30,1998 Introduction to ANSYS Part 2-Release 5.5 (001129) M3-3

September 30, 1998 M3-3 Introduction to ANSYS Part 2 - Release 5.5 (001129) Module Objective Lesson Objectives 45#钢 1200℃→ 900℃ →淬火 组织：上贝氏体+屈氏体+马氏体

Module Objective 45#钢 760℃水淬 组织：铁素体+马氏体 Lesson Objectives September 30,1998 Introduction to ANSYS Part 2-Release 5.5 1001129) M3-4

September 30, 1998 M3-4 Introduction to ANSYS Part 2 - Release 5.5 (001129) Module Objective Lesson Objectives 45#钢 760℃水淬 组织：铁素体+马氏体

Module Objective 18 CrNiW钢渗碳 1200℃→900℃→空冷 组织：魏氏渗碳体+马氏体+残余奥氏体 Lesson Objectives September 30,1998 Introduction to ANSYS Part 2-Release 5.5 1001129) M3-5

September 30, 1998 M3-5 Introduction to ANSYS Part 2 - Release 5.5 (001129) Module Objective Lesson Objectives 18CrNiW钢渗碳 1200℃→ 900℃ →空冷 组织：魏氏渗碳体+马氏体+残余奥氏体

Module Objective Lesson Objectives September 30,1998 Introduction to ANSYS Part 2-Release 5.5 (001129) M3-6

September 30, 1998 M3-6 Introduction to ANSYS Part 2 - Release 5.5 (001129) Module Objective Lesson Objectives

Module Objective 相衬 Lesson Objectives September 30,1998 Introduction to ANSYS Part 2-Release 5.5 (001129) M3-7

September 30, 1998 M3-7 Introduction to ANSYS Part 2 - Release 5.5 (001129) Module Objective Lesson Objectives 相衬

Module Objective 复型电镜 Lesson Objectives September 30,1998 Introduction to ANSYS Part 2-Release 5.5 1001129) M3-8

September 30, 1998 M3-8 Introduction to ANSYS Part 2 - Release 5.5 (001129) Module Objective Lesson Objectives 复型电镜

Module Objective 3C船板手工电弧焊 焊缝 组织：魏氏铁素体+索氏体 Lesson Objectives September 30,1998 Introduction to ANSYS Part 2-Release 5.5 (001129) M3-9

September 30, 1998 M3-9 Introduction to ANSYS Part 2 - Release 5.5 (001129) Module Objective Lesson Objectives 3C船板手工电弧焊 焊缝 组织：魏氏铁素体+索氏体

Module Objective 3C船板手工电弧焊 熔合线 组织：魏氏铁素体+珠光体 Lesson Objectives September 30,1998 Introduction to ANSYS Part 2-Release 5.5 (001129) M3-10

September 30, 1998 M3-10 Introduction to ANSYS Part 2 - Release 5.5 (001129) Module Objective Lesson Objectives 3C船板手工电弧焊 熔合线 组织：魏氏铁素体+珠光体